A monolithic semiconductor substrate

Chip Design Journal

Subscribe to Chip Design Journal: eMailAlertsEmail Alerts newslettersWeekly Newsletters
Get Chip Design Journal: homepageHomepage mobileMobile rssRSS facebookFacebook twitterTwitter linkedinLinkedIn

Chip Design Authors: Jnan Dash, Jason Bloomberg, Trevor Bradley, David Strom

Related Topics: Chip Design

News Feed Item

Research and Markets: LED Front-End Manufacturing - 2012 Report - Gearing up for the Next Investment Cycle

Research and Markets (http://www.researchandmarkets.com/research/2rlf72/led_frontend) has announced the addition of the "LED Front-End Manufacturing 2012" report to their offering.

MOCVD, lithography, plasma etching, PECVD & PVD tools to experience turbulent investment cycles in the coming years

Gearing up for the Next Investment Cycle:

The packaged LED market still presents significant opportunities for growth in the next 5 years, but is expected to saturate in value by the end of the decade. Driven by MOCVD reactors, the equipment market experienced an unprecedented investment cycle in 2010-2011. The cycle was driven by demand in LCD backlight displays, anticipation of the general lighting market and generous subsidies offered by the Chinese central and local governments in a bid to stimulate the domestic chip production and create world leading chip companies. This has resulted in a significant overcapacity situation that will take 12-18 months to absorb. The next investment cycle driven by lighting applications will start in 2013 and will be more limited in value than the previous cycle due to improvements in equipment throughput and yields. The MOCVD equipment market represents a US$4.3 billion opportunity in the 2012-2017 period.

Together, lithography, plasma etching, PECVD and PVD tools represent a US$650 million opportunity and will essentially follow a similar trend with some exceptions.

The market for dry etching tools is still growing in 2012 due to increasing adoption for PSS (Patterned Sapphire Substrate). The market for most lithography tools will however decrease as the industry transitions to larger diameter substrates and the number of wafer starts initially increases moderately but starts decreasing in 2015.

PVD equipment will also experience moderate growth during the next investment cycle. E-beam evaporators have turned into commodities, with systems available from dozens of vendors at very low cost. But opportunities exist in promoting sputtering for ITO deposition and sputtering could also gain some traction in metal deposition if the industry adopts large diameter wafers and moves from batch to single wafer processing. Sputtering equipment could then offer improved cost of ownership.

Learning from the Semiconductor Industry:

To enable massive adoption in general lighting applications, significant technology and manufacturing efficiency improvements are still needed to reduce the cost per lumen of packaged LED. Front-End LED manufacturing typically represents about 50% of the total cost of a packaged LED and offers significant opportunities. Continuous progress is being made in terms of LED structures and materials to improve performance, manufacturability or reduce cost.

MOCVD represents the single largest opportunity for front end cost reduction. Downstream, the emergence of LED dedicated tools has already contributed significantly to cost reduction in lithography, plasma and PVD processing.

Traditional large semiconductor equipment suppliers are mostly absent from the LED manufacturing equipment markets. For MOCVD, the tools are very different than the epitaxy tools used in mainstream semiconductor manufacturing. Designing and building such equipment requires significant and unique expertise that Aixtron, Veeco and Tiyo Nippon Sanso, the leading companies in the sector, have acquired through almost 2 decades.

Other front end LED manufacturing tools are similar in essence to those used in mainstream semiconductor. However, they often require a full redesign in order to deliver optimum performance and cost of ownership for LED. This opened the door to smaller companies eager to capture the opportunity offered by this niche market. Those companies are now offering LED dedicated tools delivering significant COO improvements.

Mocvd Still a Key Element for Manufacturing Cost Reduction:

With close to 100 companies involved in front end LED manufacturing, the industry is too fragmented to generate significant economies of scale. We expect massive consolidation within the next 3 years (2012-2015) which should eventually speed up process and tool standardization and allow economy of scale.

LED manufacturing still uses methods that would be considered outdated in most semiconductor industries. Consolidation and emergence of LED giants will also facilitate and speed up adoption of manufacturing paradigms coming from the IC industry.

Adoption of Silicon substrates for LED manufacturing could speed up those trends by rapidly moving LED epiwafer processing into existing, highly automated and fully depreciated CMOS fabs. This would also give LED makers access to extended process toolboxes which could pave the way for entirely new LED structures.

Report Content:

This report presents a detailed analysis of front end LED manufacturing process, equipment and LED chip design trends. The major LED die structures are presented with pro and con analyzed (standard and flip chip mesa, vertical thin film, thin film flip chip, vertical thin films with vias). The function, manufacturing process, material and emerging trends of each of the key elements of LED die are presented, including: epitaxial layers, mirrors, pads, electrodes and contacts, passivation and insulation, texturation (patterned substrates). Trends in LED substrates are analyzed and quantified: sapphire, PSS as well as risk and opportunities for LED on Silicon.

Front end manufacturing technologies and the corresponding equipment markets are analyzed in detail, including: MOCVD, lithography, plasma etching, PECVD, PCD (e-beam, sputtering).

Key Topics Covered:

  1. Glossary
  2. Table of content
  3. Report Scope
  4. Executive Summary
  5. LED Market Trends
  6. Key Constituents of LED die Structures
  7. LED Manufacturing Overview
  8. LED Substrates
  9. LED On Si
  10. LED Epitaxy
  11. Lithography
  12. Plasma Etching and Deposition For HB LED Manufacturing
  13. Physical Vapor Deposition for TCL and Metals
  14. LED Testing and Binning

Companies Mentioned: Click the link below to view the full list of companies that feature in this extensive report

For more information visit http://www.researchandmarkets.com/research/2rlf72/led_frontend

More Stories By Business Wire

Copyright © 2009 Business Wire. All rights reserved. Republication or redistribution of Business Wire content is expressly prohibited without the prior written consent of Business Wire. Business Wire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.